Repquip Header
 

AMMCO® Brake Lathe 4100B Combination Disc and Drum

 
             
  Ammco Brake Lathe 4100B MODEL #: 4100B          PART #: 904100B  
           
  Medium-Duty Lathe for Brake Drums and Rotors, Less Adapters, 110V, 60Hz (Must be Purchased with a Bench Lathe Adapter Kit)  
           
  AMMCO® Brake Lathe 4100B Combination Disc and Drum  
           
  The AMMCO® 4000B Combination Disc and Drum Brake Lathe has been professionals' first choice for more than 50 years.  
 

Click for Large Image

         
 

 

     
 

Simplicity, Speed, and Precision

The 4100B expands on the 4000B, initially introduced four decades ago. Since then, it has been the primary choice for brake technicians who manage a large quantity of medium-duty trucks. And for good reason. It's simple. It's fast. It's very precise. The speed control allows technicians to fit in more customers each day without loss of quality finish. And the added 9.875" of drum capacity doesn't hurt.

 

The AMMCO® 4100B Combination Disc and Drum Brake Lathe is the top pick for wider brake assemblies. Take the same basic design and features of the AMMCO® 4000B, but pack it with an additional spindle travel of 9.875" (250.83mm), and you'll get the 4100B.

 
     
     
     
         
   

Weight (lbs)

422.0000

Volume

High

Application

Car & Medium Truck

Rotors

Yes

Drums

Yes

Max Rotor Diameter

19"

Max Rotor Face Width

3-3/4"

Standard Max Arbor Capacity

100 lbs.

Heavy Duty Max Arbor Capacity

200 lbs

Max Rotor Thickness

4"

Flywheel Service Capable

Yes

Spindle Bearings

Bronze Sleeve

Motor

1 HP

Tool Bits (shipped with)

Negative Rage

Double Taper Arbor

Yes

Spindle Speed

60,80,115 RPM

Drum Feed Rate

.002" to .020"/REV

Max Drum Depth

9.875"

Rotor Feed Rate

.002"/.010"/REV

 
     
     
 

 Key Features

  • Ideal for medium-duty truck service.
  • Extended spindle increases drum capacity to 9.875".
  • Three adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger ones.
  • Two feed rates allow for quick rough-cut and finer finish-cut settings.
  • Speed control gives operators a quality finish in less time.
  • Adjustable-bar twin cutter provides the greatest range of settings from small cars to 5-ton applications
   
     
     
     
     
     
     
     
     
     
  Documentation:   Operation Manual Product Brochure  
         
         
         
         
         
             
  Back Ammco          
             
  Back Brake Lathe Main          
             
  Back Repquip Home